|
Booth Dimensions |
|
|
- Internal Size(LxBxH) |
12000 x6160 x6000 mm |
|
- External Size(LxBxH) |
14162x6000 x 6000 mm |
|
-Total Power |
26KW |
|
Foundation and Floor |
|
|
- Loading Capacity of Galvanized Grating |
NO |
|
- Surface Area |
20M² (Rear air exhaust plenum chamber) |
|
- Metal Basement |
NO Back Draft Model |
|
- Drive-in Ramps |
NO |
|
Wall and Door |
|
|
- Steel Wall and Roof Panel |
Double Construction with Insulations EPS 60mm |
|
- Thickness |
Double Construction with Insulations EPS 50mm |
|
- Folded Entrance Door With Safety Glass Window |
4300 x 4800 mm (BxH) |
|
- Operator’s Door With Safety Glass Window |
800x2000 mm(BxH) 2 Pieces |
|
Lighting |
|
|
- Ceiling Lightings |
14 Units, each 4x36 W, Total 2016W |
|
- Side Lightings |
20 Units, each 2x36 W, Total 1440W |
|
- Brightness |
>1000 Lux, IP54 Grade |
|
Filtration |
|
|
- Pre filters |
Fiberglass, Paint-Stop-Filters Plate type duel filters |
|
- Ceiling Filters |
EU5 Fine Filters, 5 Units |
|
- Floor Filters |
Fiberglass, Paint-Stop-Filters |
|
Ventilation System |
|
|
- Direct Drive Motor (Fresh Air) |
1x7.5KW,970RPM,380V,50HZ motor certification: CE |
|
- Direct Drive Motor (Exhaust Air) |
1x7.5KW,970RPM,380V,50HZ Domestic motor certification: CE |
- Fan Capacity |
25.000m³/h |
|
- Air Flow Speed |
+/- 0.28 m/sin an empty booth |
|
Heating System |
|
|
- Heating Exchanger |
Stainless Steel 1Gr18Ni9Ti |
|
- Heating Exchange Capacity |
1x232KW (260.000kcal/H)RIELLO |
|
- Max. Drying Temperature |
80 ℃ |
|
- Heating time |
10-15 min (from 20 to 60℃) by Drying Phase |
|
- Heating Type (on option) |
Diesel / Gas Burner (Made Italy) |
|
Control Board |
|
|
- Control system |
Stander control Delta Depressurization start system EN60204-1-2006 |
|
- Function |
Spraying ,baking, warming spray paint, emergency stop switch |
|
- PLC |
Yes |
|
- Inverter control |
On option |
|
- Import element |
master device import element |
|
- Overpressure Manometer |
yes |
|
- Alarm equipment |
yes |
