Product Detail

SB-8900

Specification of Paint Booth

TOTAL OUTSIDE SIZE

14000 x 5570 x 3610  mm ( L x W x H )

Inside Size

6900 x 4000 x 2800  mm ( L x W x H )

Outside Size

7010 x 5570 x 3610 mm ( L x W x H )

Basement

Full metal foundation , full grids

Metal Basement

350mm height , the ventilation effect is better than traditional spray booth

Drive –in Ramps

No Drive-in ramp , the basement sunken , more convenience and fast when car drive in

Wall board  and Roof Panel

Adopt high quality double construction fireproof insulation rock wool panel , thickness is 50mm

Entrance door

1 set ,Size : 3100 x 2700 mm (W x H), tempering glass observation window , connected with bake booth share a door , size : 3100 x 2500mm

Operator door

1 set , Size 700 x 2000 mm( W xH) tempering glass observation window

Ceiling Lighting

8 units, each 4 x 36 W, total  1152 W, adopt Germany OSRAM lamp, electronic ballasts

Side Lighting

8 units, each  2x 36 W, total  576 W, adopt Germany OSRAM lamp, electronic ballasts

Brightness

≥ 1000 LUX

Pre filters

EU3 grade pocket filter system , filtration effect is much better

Ceiling Filters

EU5 grade high efficient filter. Its filtering rate reaches 98%

Exhaust filter

Fiber glass paint – stop filter

Inlet Fan

Adopt big impellor turbo fan 7.5KW, Three – phase , 380 V, 970 rpm ,50 HZ

Outlet fan 

Adopt big impellor turbo fan 7.5KW, Three – phase , 380 V, 970 rpm ,50 HZ

Painting and baking exchange system

Solenoid valve + pressure adjustment control cylinder driven damper exchange

 Total Fan  capacity

25,000m3/h (14700cfm)

Air flow speed 

0.23m/s in empty booth, in loaded air flow : 0.25-0.35m/s

Air flow adjust

Adopt manual air damper both on air inlet and exhaust , to control the pressure of booth

Control system

Standard control system

Pressure Testing

The pressure gauge indicate the pressure inside booth

Electrical Components

Mainly adopt famous brand SCHNEUDER or SIEMENS

Function

Painting,  lighting, emergency stop switch, failure indication,

Total Power

17.5KW

 

                Specification of Bake Booth

Inside Size

6900 x 4000 x 2800  mm ( L x W x H )

Outside Size

7010 x 5570 x 3610 mm ( L x W x H )

Basement

Full metal foundation , full grids

Metal Basement

350mm height , the ventilation effect is better than traditional spray booth

Drive –in Ramps

No Drive-in ramp , the basement sunken , more convenience and fast when car drive in

Wall board and roof panel

Adopt high quality double construction fireproof insulation rock wool panel , thickness is 50mm

Entrance door

1 set ,Size : 3100 x 2700 mm (W x H), tempering glass observation window , connected with paint booth share a door , size : 3100 x 2500mm

Operator door

1 set , Size 700 x 2000 mm( W x H) tempering glass observation window

Ceiling Lighting

4 units, each 4 x 36 W, adopt Germany OSRAM lamp, electronic ballasts

Side Lighting

-----------------------

Brightness

≥ 300LUX

Pre filters

Fiberglass paint-stop filters

Ceiling Filters

EU5 grade high efficient filter. Its filtering rate reaches 98%

Bottom filter

Fiberglass paint-stop filters

Inlet Fan

Adopt big impellor turbo fan 7.5KW, Three – phase , 380 V, 960 rpm , 6-pole motor , 50 HZ

Outlet fan 

-----------------------

 Total Fan  capacity

20,000m3/h

Air flow speed in Cabin

0.2m/s in empty booth, in loaded air flow : 0.2-0.35m/s

Heating Exchanger

Adopt High efficient heat – resistant(SUS304) stainless steel as cycling heat exchanger

Burner Model

Adopt  Italy Riello diesel Burner G20 , heating capacity 180.000lcal/h

Heating Time

5-7 minutes (from 20 to 60â—¦ C) under baking status, max baking temperature is 80 â—¦C

Control system

Standard control system

Electrical Components

Mainly adopt famous brand SCHNEUDER or SIEMENS

Function

Painting , lighting , hours , emergency stop switch , alarm indication , failure indication , baking time setting , temperature display , over-temperature alarm indication , baking delay stop protection

Total Power

6.5KW